The B.GK12 capillary tube mat is a prefabricated unit. These prefabricated units are specially designed for dry-lined construction and can be used for both ceilings and walls. Prefabricated units are prepared in the factory for efficient assembly so that only the usual dry-lining work has to be carried out on site.
Technical Data:
| Structure | 12.5 mm gypsum plasterboard panel, capillary tube mat (polypropylene), 30 mm polystyrene foam |
| Collector pipe Ø | 20 x 2 mm |
| Collector tube Ø | 3.35 × 0.5 mm |
| Capillary tube spacing (A) | 10 mm |
| Lenght (L) | 1,500 and 2,000 mm |
| Width (B) | 600 mm pre-drilled for screwing in 500 mm grids |
| Mass when filled | 14 kg |
| Active surface | 1.2 m² |
| Water content | 0.46 l/ m² |
| Cooling capacity* | 76 W or 64 W/m² |
| Heating capacity* | 150 W or 135 W/m² |
| Permissible heating water temperature | 45°C |
| Operating pressure | 4 bar |
| Connection with quick-action couplings | 11, connections outside |
| Field of application | For dry-lined radiant cooling/ heating ceilings |
*Capacity achieved under defined conditions
Group B capillary tube mats